NANOCOLOR® VARIO C2 and VARIO 4
Heating blocks for reliable digestions
The NANOCOLOR® heating blocks enable a fast and safe performance of all kinds of sample digestions required in water and waste water analysis. Standard parameters for routine digestions such as COD, TOC, total nitrogen, total phosphorus and metals are pre-programmed in the heating blocks and help the user to avoid mistakes.
NANOCOLOR® VARIO C2, single block
REF: 919350
The NANOCOLOR® VARIO C2 enables a fast and safe performance of all kinds of sample digestions required in water and waste water analysis for up to 12 samples in parallel. Standard parameters for routine digestions such as COD, TOC, total nitrogen, total phosphorus and metals are pre-programmed in the heating blocks and help the user to avoid mistakes.
Key Features:
- Type: Heating block for chemical-analytical digestions
- Bores: 12 with 16 mm outer diameter
- Display: Colored, backlit LCD touch screen
- Temperatures: 6 preprogrammed temperatures 70 °C / 100 °C / 120 °C / 148 °C / 150 °C / 160 °C, 6 free memory locations for individual temperature settings
- CE Certified: Yes
| 1 Unit | $1,795.00 |
|---|
NANOCOLOR® VARIO 4, double block
REF: 919300
The NANOCOLOR® VARIO 4 enables a fast and safe performance of all kinds of sample digestions required in water and waste water analysis for up to 24 samples in parallel. The two heating units can be controlled separately. The standard parameters for routine digestions such as COD, TOC, total nitrogen, total phosphorus and metals are pre-programmed in the heating blocks and help the user to avoid mistakes.
Key Features:
- Type: Heating block for chemical-analytical digestions
- Bores: 2 x 12 with 16 mm outer diameter
- Display: Colored, backlit LCD touch screen
- Temperatures: 6 preprogrammed temperatures 70 °C / 100 °C / 120 °C / 148 °C / 150 °C / 160 °C, 6 free memory locations for individual temperature settings
- CE Certified: Yes
| 1 Unit | $3,095.00 |
|---|
The small one and the big one
The heating block NANOCOLOR® VARIO C2 enables the simultaneous digestion of up to 12 samples. For a higher sample throughput the NANOCOLOR® VARIO 4 is perfectly suited, as it allows up to 24 simultaneous digestions in two separately controllable heating units. Therefore, MACHEREY‑NAGEL offers the appropriate heating block to each user for routine analysis in the laboratory. The NANOCOLOR® heating blocks are equipped with lockable protective lids and a touch protection for increased work safety.
Extremely versatile and maximally secure
In addition to the preprogrammed temperatures and heating times, a large number of user-specific digestion methods can be stored. The USB and RS232 interfaces allow an easy connection to a PC and enable the convenient linkage to the NANOCONTROL® inspection equipment monitoring tools. The graphical representation of the heating curves enhances transparency about the temperature stability. The electronic overtemperature sensor protects the heating block from overheating.
Temperature testing and calibration
A temperature test can be performed using the NANOCOLOR® T‑Sets to safeguard results against authorities and supervisors. The free PC software of the heating blocks facilitates checking of temperatures and the creation of the respective reports. After measurement data transfer via the interfaces using the PC software, the testing certificate is created directly, which ensures a GLP-compliant documentation of all equipment testing.
